We are located in Vishwakarma Industrial Area, District Jaipur, just 0.5 km away from NH8 nearby Road no 14 in VKI Area. Spread over an area of 12,000 sq. ft. and equipped with state of the art equipment’s, it is managed by a team of experienced personnel who consistently ensures that every production unit adheres to the quality benchmarks of industry. An well equipped Workshop unit houses the Core building, Coil winding and Assembly section managed by an experienced team of 20, with expertise in design and quality control ensures only best quality to be rolled out. Successful delivery of 5500 units of different transformers speaks of our ability and skill.
All manufactured units are tested in 2500 sq. ft. of Testing Facility, with state of the art technology and latest
guidelines, ensuring quality satisfaction for our esteemed customers. Type test, Routine test and Special tests are
undertaken depending on the transformer specifications to meet client’s requirement in full. Spacious Warehouse with capacity to store 500 plus transformer units along with other facilities helps us to manage bulk orders and quality management of product distribution. This also includes the spares and accessories stock, maintained by the company to cater to the after sale servicing capabilities of the company.
We have tied up with leading transport providers & rail road’s to reach you in our committed time. Just place your order specification and we will be there for you
Manufacturing Facilities
Winding Most Suitable type of winding constructions is adopted in our designs to give optimum performance with regard to thermal, mechanical and electrical Stresses. These are:
Level Winding
Spiral
Crossover Type
Continuous disc type
Helical Type etc.
To minimize stray losses, conductors are suitable transported. When necessary, we are using Progressive Transportation Technique, whenever possible, Conductor Insulation for Round Wire can be Super Enamel or Paper Covering. For rectangular strips, paper covering can be double layer, triple layer or multi layer, Best grade/imported paper is used.
Core Assembly
The Transformers are built with full-annealed, Cold Rolled Grain Oriented (CRGO) Silicon laminations. Only best grade, prime CRGO material is used by us. Full metered designs are incorporated to minimize losses, magnetizing current and noise.
Core Coile Asssembly
Full attention is paid to ensure to robust construction. Radial spaces of pre compressed board are interlocked with the axial blocks in dovetail type joints. Parmali wood rings are used to ensure required mechanical and electrical strength, commensurate with the rating and voltage class of the Transformers, Suitable steel section are used for core clamps, lifting brackets and base Supports These are tightened with the help of core studs/tie rods using lock nuts to make the whole assembly robust. HT loads are taken out the SRBP tubes and clamped to special PIE (a) structure, attaches to the core channel. LI leads are taken to the bushing terminals through a oiled Bux Bar and connected to the terminals through flexible jumper
Tanking And Painting
The Tanks are MS Fabricated and suitable stiffened. A high safety factor is kept and suitable steel sections are used. Cooling is provided using radiators, made of Elliptical Tubes or Pressed Steel Fins. The radiators are generally welded to the tank, but can be detachable type also. All tanks are tested for leakage by subjecting to pressure above 10 PSI. Vacuum test are also carried out to ensure robustness. Tanks and Radiators are cleaned by shot blasting, following by proper surface treatment and paint. Expose burned paint is generally applied.
Insulation
The insulation rating is the maximum allowable winding (hot spot) temperature of a transformer operating at an ambient temperature of 40°C. Insulation systems are classified by the temperature rating.
Transformer Oil
Transformer oil is a mineral insulating or cooling oil derived from crude petroleum. It is a mixture of various hydrocarbons consist partly aliphatic compounds (open chain compounds) with the general formula – CnH2n+2 and CnH2n.
Testing Facility
Type tests are made to prove to withstand the all irregularities in transmission/ distribution line. T-Power have in house facility to undergo temperature rise and impulse test conforming to latest national and international standard specifications. Other tests such as short circuit withstand tests (Dynamic & Thermal) are conducted at an independent govt. recognized testing laboratory at Central Power.
Following Routine Tests are made on every unit.
Insulation Resistance Test
Resistance measurement of winding
Turns Ratio Test
Polarity and Phase relationship test
No Load losses measurement
Polarity and Phase relationship test
Excitation current measurement Impedance voltage test
Load loss measurement
Dielectric tests includes applied voltage test and induced voltage test Leakage test of Transformer tank.
Click to Zoom